Communication Unit And Antenna Unit Self Test - Furuno FELCOM 250 Operator's Manual

7.5.2

Communication unit and antenna unit self test

The communication unit and antenna unit can be tested with the Web software.
1. Login as Administrator in the Web software.
2. Click [Selftest] in the menu bar to show the [Selftest] screen.
3. To test the antenna unit, select [ADE]. To test the Communication Unit, select
[BDE].
4. Click [Execute].
• For ADE, the message "Comms will be disabled until finishing self-test and re-
starting AntUnt. And AntUnt will restart automatically after self-test. Are you
sure you want to execute?" appears.
• For BDE, the message "Comms will be disabled until finishing self-test and re-
starting CmmUnt. Are you sure you want to execute?" appears.
5. Click [OK] to start the self test. Each test takes approximately five minutes to com-
plete. A test window appears during the test.
Note: Do not navigate to another screen in the web browser or reset the power
during the self test.
When the antenna unit test is completed, the message "Completed. Please wait
a moment for restarting AntUnt." appears.
7. MAINTENANCE AND TROUBLESHOOTING
Elapsed time
7-7