2. SETTINGS FOR SENSOR ADAPTER
Note: Change the current directory to the one where the binary file is saved.
5. Enter "ftp 172.31.17.108" on the command prompt.
Confirm that "220-MC3000_CS_MAINTENANCE" is shown.
6. Enter the user name and password.
Enter the password.
Enter the password.
Enter the password.
7. After the login, enter "dir".
The file names that are saved in the Sensor Adapter are displayed. Confirm that
the file names shown below are shown on the display.
Enter the password.
Enter the password.
Enter the password.
Enter "dir" .
Enter "dir" .
Enter "dir" .
8. Enter "bin", and then enter "hash".
9. Enter the command to transfer the firmware program.
Example: put 24500810_mc_cs_mainpg.bin
10. When you transfer other program, enter the command to transfer the program.
2-4
Enter the ftp command.
Enter the ftp command.
Enter the ftp command.
Confirm that this massage appears .
Confirm that this massage appears .
Confirm that this massage appears .
Enter the user name.
Enter the user name.
Enter the user name.
Enter the user name.
Enter the user name.
Enter the user name.
Check these file names.
Check these file names.
Check these file names.