Poor Transfer At Image Front - Konica Minolta AccurioPress C2070 Troubleshooting Manual

1.3.11. Poor transfer at image front

(1) Symptom
When the periodic cleaning of the 2
entire area of the machine front side image.
(2) Cause
nd
The dust from 2
and the pressed status becomes improper.
(3) Solution
Clean the pressure sliding part (4 position) and surrounding area (See the figure in below)
with the alcohol and the hydro wipe.
If the symptom does not improve, replace the pressing cover (A50U5209) at machine front
side with new one.
KONICA MINOLTA Confidential
nd
transfer unit is not enough, poor transfer may occur at the
Front side image gets
lighter; color is fainted.
Paper feed direction
transfer roller shaft due to wearing, builds up on the 2
- 74 -
nd
transfer pressing part