6 CONTROLS
6.10.8
6.10.9
38
Time
400838-11
Setting the clock
401444-01
1
The time is shown in area
Info
The time must be reset after the battery was disconnected
or the fuse was removed.
Condition
The motorcycle is stationary.
–
Switch on the ignition by turning the ignition key
to position ON
.
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button and the SET button pressed simultane-
ously.
The time display begins to flash.
–
Press the MODE button to set the hour.
–
Press the SET button to set the minute.
of the display.