Adjusting The Basic Position Of The Hand Brake Lever - KTM 690 Enduro R 2018 Owner's Manual

12 BRAKE SYSTEM
12.2
124

Adjusting the basic position of the hand brake lever

B01955-10
ditions, for example when making "wheelies" or if the rear wheel
spins. This causes the ABS to switch off.
To reactivate the ABS, the vehicle must be stopped and the
ignition switched off. The ABS is reactivated when the vehicle is
switched on again. The ABS warning lamp goes out when you start
off.
4
The button can be used to switch ABS off manually (see Start-
ing).
–
Adjust the basic position of the hand brake lever to your hand
size by turning adjusting wheel
Info
Push the hand brake lever forward and turn the adjust-
ing wheel.
Do not make any adjustments while riding.
1
.