Installing The Rear Wheel - KTM 690 Enduro R 2018 Owner's Manual

13 WHEELS, TIRES
13.4
154

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
H00937-11
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Remove spacer.
–
Clean and grease shaft seal ring
the spacer.
Long-life grease ( p. 261)
–
Insert the spacer.
( p. 156)
1 A
and contact surface of