14 ELECTRICAL SYSTEM
14.12
186
Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a mark at the height of the center of the
low beam headlight.
–
Make another mark at a distance
Guideline
Distance
B
–
Position the vehicle vertically at a distance
wall.
Guideline
Distance
A
–
The rider, with luggage and passenger if applicable, now
mounts the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower
mark when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger if
applicable.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
B
under the first mark.
5 cm (2 in)
A
away from the
5 m (16 ft)
p. 187)