Table of Contents
Advertisement
10.12
Adjusting the riding sag
Preparatory work
–
Raise the motorcycle with the work stand.
–
Remove the seat. (
–
Take off the side cover.
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Medium (standard)
Hard
Info
201352-10
The spring rate is shown on the outside of the spring.
Finishing work
–
Install the shock absorber.
–
Mount the side cover.
–
Mount the seat. (
–
Remove the motorcycle from the work stand.
–
Check the static sag of the shock absorber. (
TUNING THE CHASSIS 10
p. 102)
80 N/mm (457 lb/in)
85 N/mm (485 lb/in)
p. 102)
p. 87)
91
Advertisement
Table of Contents
