20 Troubleshooting - KTM 690 Enduro R 2018 Owner's Manual

20 TROUBLESHOOTING

Faults
The engine does not turn when
the starter button is pressed
Engine turns only if the clutch
lever is drawn
Engine turns but does not start.
226
Possible cause
Operating error
The battery is discharged
Fuses 1, 2, 3 are blown
Main fuse burned out
No ground connection present
The vehicle is in gear
The vehicle is in gear and the
side stand is folded out
Operating error
Fuse 3 blown
The plug-in connection of the
fuel hose connection is not
connected
Defect in fuel injection system
Action
–
Carry out the start procedure.
( p. 57)
–
Recharge the battery. (
–
Check the quiescent current.
–
Change the fuses of individual power
consumers. ( p. 176)
–
Change the main fuse. (
–
Check the ground connection.
–
Shift gear to neutral.
–
Shift gear to neutral.
–
Carry out the start procedure.
( p. 57)
–
Change the fuses of individual power
consumers. ( p. 176)
–
Connect the plug-in connection of the
fuel line.
–
Read out the fault memory using the
KTM diagnostics tool.
p. 169)
p. 172)