Adjusting Handlebar Position - KTM 690 Enduro R 2018 Owner's Manual

10.14

Adjusting handlebar position

–
Remove screws
the handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar support in the required position. Mount
401454-10
and tighten screws
Guideline
Screw, handle-
bar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
TUNING THE CHASSIS 10
1 . Take off the handlebar clamps. Remove
2 . Remove the handlebar support.
2
.
M10 40 Nm (29.5 lbf ft)
Loctite ® 243™
93