Adjusting The Play Of The Steering Head Bearing - KTM 690 Enduro R 2018 Owner's Manual

11.7

Adjusting the play of the steering head bearing

Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Loosen screw
–
Loosen and retighten screw
Guideline
Screw, top steering
head
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid strains.
B01951-10
–
Fully tighten screws
Guideline
Screw, top triple
clamp
–
Mount and tighten screw
Guideline
Screw, steering stem
Finishing work
–
Check the play of the steering head bearing. (
–
Remove the motorcycle from the lift stand. (
SERVICE WORK ON THE CHASSIS 11
1 . Remove screw 2 .
3
.
M20x1.5 12 Nm (8.9 lbf ft)
1
.
M8 17 Nm (12.5 lbf ft)
2
.
M8 20 Nm (14.8 lbf ft)
p. 95)
p. 99)
p. 95)
101