13 WHEELS, TIRES
13.5
156
Checking the rear hub rubber dampers
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They even-
tually wear out during operation. If the rubber dampers are not changed in time, the rear sprocket carrier
and the rear hub become damaged.
–
Position wheel speed sensor
7
tighten screw
.
Guideline
Screw, wheel speed
sensor
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the chain tension. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the rear wheel.
6
in the drill hole. Mount and
M6
6 Nm (4.4 lbf ft)
p. 95)
p. 107)
p. 95)
(
p. 152)