Viewing The Lap Time - KTM 450 RALLY FACTORY REPLICA 2024 Manual

7.6

Viewing the lap time

Info
This function can only be opened if lap times have actually been timed.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The hour display flashes.
–
Adjust hour display with the button
–
Wait 3–5 seconds
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
hours by pressing the button
400330-01
Info
The seconds can only be set to zero.
If no button is actuated for 15-20 seconds or there
is no signal from the wheel speed sensor, then the
settings are automatically stored and the Setup menu
is closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Briefly press the button
LAP 1 appears on the left side of the display.
–
The laps 1–10 can be viewed with the button
–
Press and hold the button
times.
–
Briefly press the button
Next display mode
400321-01
Info
When an impulse is received from the wheel speed sen-
sor, the left side of the display changes back to the
SPEED mode.
COMBINATION INSTRUMENT 7
briefly until CLK appears at the
for 2–3 seconds.
and/or button
and the button
briefly until LAP appears at the
.
.
for 3–5 seconds to clear the lap
.
.
.
27