Changing The Turn Signal Bulb - KTM 690 Enduro R 2018 Owner's Manual

14 ELECTRICAL SYSTEM
14.11
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
184
S02206-10

Changing the turn signal bulb

–
2
Pull bulb socket out of the reflector.
–
3
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
–
Insert the protection cap.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
out of the bulb socket.
p. 247)
p. 180)
p. 186)