7.5
Setting the clock
7.6
Viewing the lap time
Info
This function can only be opened if lap times have actually been timed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
400330-01
hours by pressing the button
Info
The seconds can only be set to zero.
If no button is pressed for 15 - 20 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Briefly press the button
LAP 1 appears on the left side of the display.
–
The laps 1–10 can be viewed with the button
–
Press and hold the button
The lap times are deleted.
–
Briefly press the button
400321-01
Next display mode
Info
When an impulse is received from the wheel speed sen-
sor, the left side of the display changes back to the
SPEED mode.
7 COMBINATION INSTRUMENT
briefly until CLK appears at the
for 2–3 seconds.
and/or button
and the button
briefly until LAP appears at the
.
.
for 3-5 seconds.
.
.
.
25