Table of Contents
Advertisement
No.
Knife motion at 1st cycle of double stitching
This item sets "With/without motion" of cloth cutting knife at
1st cycle when double stitching is performed.
: Normal knife motion
Off
Maximum speed limitation
This item sets max. number of revolutions of
the sewing machine. The maximum value of
data edit is equal to the number of revolutions
of
Maximum speed limitation of the
memory switch data.
"II-3-2. Memory switch data list"
→ Refer to
p.112.
Pitch of going
This item sets sewing pitch of going side of
bar-tacking shape (Shape Nos. 27, 28, 29 and
30 of
Width of going
This item sets width of going side of
bar-tacking shape (Shape Nos. 27, 28, 29 and
30 of
Pitch of returning
This item sets sewing pitch of retuning side of
bar-tacking shape (Shape Nos. 27, 28, 29 and
30 of
Width of returning
This item sets width of returning side of
bar-tacking shape (Shape Nos. 27, 28, 29 and
30 of
Presser foot pressure
This memory switch is used for setting the
pressure of the presser foot to be applied for
clamping the material. When the set value of
this switch is set to 25, the presser foot pres-
sure is approximately 4 kg. When the set val-
ue of this switch is set to 80, the presser foot
pressure is approximately 10 kg.
Sewing speed at the first bartacking section
This memory switch is used for setting the
sewing speed to be employed for sewing the
first bartacking section of a square pattern
shape.
Sewing speed at the second bartacking
section
This memory switch is used for setting the
sewing speed to be employed for sewing the
second bartacking section of a square pattern
shape.
(Remarks)
1 : Displayed according to the shape.
2 : Displayed when it is set to with edit.
Refer to
"II-2-10. Setting procedure of sewing data with/without edit"
3 : Displayed when the function is selected.
Item
: Normal knife motion
ON
).
).
).
).
Setting
range
---
400 to 4200
0.200 to
2.500
0.10 to 10.00
0.200 to
2.500
0.10 to 10.00
20 to 80
400 to 4200
400 to 4200
− 88 −
Edit unit
Remarks
---
*2, *3
100 sti/min
---
0.025mm
---
0.05mm
---
0.025mm
---
0.05mm
---
1
100
*1, *2
100
*1, *2
p.93.
Advertisement
Table of Contents
