Table of Contents
Advertisement
No.
Sewing start position (Feed direction)
Sewing start position in terms of work
clamp is set. Set this item when starting
position is desired to be shifted due to
overlapped section or the like.
Cloth cutting knife size
When
Function of plural mo-
tions of cloth cutting knife is set to Effec-
tive, input knife size used.
Function of plural motions of cloth cutting knife
Ineffective/effective
: Ineffective
Function of thread breakage detection Ineffective/
effective
: Ineffective
Needle thread trimming release
motion start distance
Distance from start of sewing to start of
trimmer release motion of needle thread
trimmer motor is inputted.
Bobbin thread trimming release
motion start distance
Distance from start of sewing to start of
trimmer release motion of bobbin thread
trimmer motor is inputted.
Counter updating unit
Unit to update sewing counter is set.
Selection of start switch
When knee switch is selected, perform start of preset-
ting with knee switch and cancel of presetting is per-
formed with hand switch. (A mode)
When hand switch is selected, perform start of preset-
ting with hand switch and cancel of presetting is per-
formed with knee switch. (B mode)
: Knee
switch
Selection of use/non-use of cloth detection sensor
When "with cloth detection" is selected, start of preset-
ting is not performed unless cloth is set on cloth detec-
tion sensor.
When "without cloth detection" is selected, presetting
is started even when cloth is not set on cloth detection
sensor.
: With cloth
detection
Selection of jump feed function
When "with jump feed" is selected, jump feed amount
can be inputted before the 1st sewing pattern.
: Without
jump feed
Item
: Effective
: Effective
: Hand
switch
: Without cloth
detection
: With jump
feed
− 113 −
Setting range
Edit unit
2.5 to 110.0
0.1mm
3.0 to 32.0
0.1mm
---
---
---
---
0 to 15.0
0.1mm
0 to 15.0
0.1mm
1 to 30
1
---
---
---
---
---
---
Initial display
2.5mm
32.0mm
Ineffective
Effective
1.0mm
1.5mm
1
Knee switch
With cloth
detection
Without
jump feed
Advertisement
Table of Contents
