Table of Contents
Advertisement
(10) Measure to be taken in the case of power interruption during operation
If the electricity is cut off when material is being
brought to the sewing position and preset board ❶
❶
and carriage ❷ come in contact with each other,
discharge air from the machine, slightly press pre-
set board ❶ back ward, raise carriage ❷ by hand,
❷
and move preset board ❶ toward you to return it to
its home position. Then, connect the air to the ma-
chine.
To discharge air from the unit, press one-touch joint
❸ in the direction of the arrow, and remove hose ❹ .
For the connecting procedure, refer to
"I-3-3. In-
stalling the air hose"
p.5.
❸
❹
– 32 –
Advertisement
Table of Contents
