JUKI AC-172N-1790AN Instruction Manual page 106

Button and display
I
WITH/WITHOUT DOUBLE
STITCHING display
J
NUMBER OF TIMES OF BAST-
ING display
K
NEEDLE THREAD TENSION
display
L
NUMBER OF TOTAL STITCHES
display
M
COUNTER VALUE CHANGE
button
N
COUNTER CHANGE OVER
button
O
OVEREDGING WIDTH, LEFT
display
P
KNIFE GROOVE WIDTH, LEFT
display
Q
LBH PATTERN DATA AUTOMAT-
IC TURN button (to advance)
R
CHANGEOVER OF AC MODE
AND LBH MODE button
S
PATTERN NO. display
T
SPEED variable resistor
U
CLOTH CUTTING LENGTH dis-
play
V
KNIFE GROOVE WIDTH, RIGHT
display
With/without double stitching which is set to LBH pattern data during sewing
is displayed.
Number of times of basting which is set to the LBH pattern data during sew-
ing is displayed.
Needle thread tension which is set to the LBH pattern data during sewing is
displayed.
Number of total stitches of the LBH continuous stitching data during sewing
is displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to "II-1-8. Using counter"
Display of sewing counter/No. of pcs. counter can be changed over.
→ Refer to "II-1-8. Using counter"
Overedging width, left which is set to the LBH pattern data during sewing is
displayed.
Knife groove width, left which is set to the LBH pattern data during sewing is
displayed.
LBH pattern data which are used in AC pattern data being sewn at present
are automatically turned.
When the button is pressed, the AC automatic sewing screen is displayed
and automatic sewing can be performed.
LBH pattern No. inputted to LBH continuous stitching data during sewing is
displayed. LBH pattern No. being sewn at present is displayed in reverse
video.
Number of rotation of sewing machine can be changed. The number of rota-
tion which is set is displayed.
Cloth cutting length which is set to the LBH pattern data during sewing is
displayed.
Knife groove width, right which is set to the LBH pattern data during sewing
is displayed.
− 102 −
Description
p.56.
p.56.