JUKI AC-172N-1790AN Instruction Manual page 139

I
E
G
J
④ Select the communication procedure.
There are four communication procedures as described below.
(E) Writing data from media to panel
(F) Writing data from personal computer (server) to panel
(G) Writing data from panel to media
(H) Writing data from panel to personal computer (server)
F
Select the button of communication procedure you desire.
H
⑤ Select the data No.
When (I) is pressed, the writing file selection screen is
displayed.
Input the file No. of the data you desire to write with the ten
keys (J) . For the file No., input the numerals of the part xxx of
VD00xxx .vdt of the file name.
Designation of the pattern No. of writing destination can be per-
formed in the same way. When the writing destination is the pan-
el, pattern Nos. which have not been registered are displayed.
K
⑥ Determine the data No.
When ENTER button
screen is closed and the selection of the data No. has been com-
pleted.
− 135 −
(K) is pressed, the data No. selection