Table of Contents
Advertisement
(2) Editing procedure of the LBH continuous stitching data
A
B
① Display the LBH continuous stitching data input screen.
Only in case of the LBH continuous stitching input screen (light
blue), it is possible to change the continuous stitching data. In
case of the sewing screen (green), press READY key
and display the LBH continuous stitching data input screen (light
blue).
After the screen is displayed, select the LBH continuous stitching
data No. you desire to edit referring to
tinuous stitching
LBH continuous stitching data No. 1 only has been registered
at the time of your purchase. However, LBH pattern No. has not
been inputted and the screen is displayed as shown in the figure
on the right side.
② Display the feed amount input screen.
When FEED AMOUNT button
feed amount input screen is displayed.
③ Input the feed amount.
Input the feed amount with plus/minus buttons
C
Input range changes according to the work clamp size which has
been set.
④ Determine the feed amount.
When ENTER button
screen is closed and input has been completed.
− 104 −
(1) Selection of LBH con-
data.
(C) is pressed, the feed amount input
(A) is pressed, the
(B).
Advertisement
Table of Contents
