❾
❻
❼
Bundle two air hoses and switch cable
6)
with clamp . Tighten screw . Then, slide
the cover of duct in the direction of the arrow.
Place two air hoses and switch cable in
the duct and close the cover of duct .
– 19 –
4)
Fix auxiliary clamp
asm. ❾ with three
screws . Tem-
porarily fix screws
❻ and ❼ and the
washer, removed in
step 3), with aligned
with the mark-off
lines.
5)
Supply air. Securely
tighten screws ❻
and ❼ with setting
plate support
pressed against
preset table .