Table of Contents
Advertisement
(2) Sewing data list
Sewing data are those that can be inputted to 99 LBH patterns from LBH pattern 1 to 99 and can be in-
putted to each LBH pattern.
The sewing machine has been set in the state that the data which is necessary to set "With/ without edit"
cannot be set at the time of your purchase. Change over the function to "With edit" if necessary for use.
→
Refer to
"II-2-10. Setting procedure of sewing data with/without edit"
No.
Sewing shape
This item selects the shape from among the sewing shapes
of 30 different kinds which the sewing machine has.
→ Refer to
"II-2-6. Sewing shape list" p.80
* Only 12 kinds of standard sewing shapes can be se-
lected at the time of your purchase. When increasing
the kinds of shapes, perform setting of
shape selection level of memory switch data.
→ Refer to
"II-3-2. Memory switch data list"
Cloth cut length
This item sets the length of cloth that is cut by
cloth cutting knife. However, in case of bar-
tack shape (Nos. 27, 28, 29 and 30 of S01),
sewing length is set.
By making effective
motions of cloth cutting knife of memory switch
data, make the plural motions of knife by the
knife size set in the item
knife size, and the sewing product is cut.
→ Refer to
"II-3-2. Memory switch data list"
p.112.
Knife groove width, right
This item sets the clearance between cloth
cutting knife and right parallel section.
Knife groove width, left
This item sets the clearance between cloth
cutting knife and left parallel section.
Overedging width, left
This item sets the overedging width of left par-
allel section.
Ratio of right and left shapes
This item sets enlargement/reduction ratio of
right side shape making the knife position as
the center.
Pitch at parallel section
This item sets sewing pitch of left and right
parallel sections.
2nd bar-tacking length
This item sets length of bar-tacking on the front
side.
(Remarks)
1 : Displayed according to the shape.
2 : Displayed when it is set to with edit.
Refer to
"II-2-10. Setting procedure of sewing data with/without edit"
3 : Displayed when the function is selected.
Item
1
to
30
p.112.
Function of plural
Cloth cutting
− 83 −
p.93.
Setting
range
1 to 30
Sewing
3.0 to 119.6
-2.00 to 2.00
-2.00 to 2.00
0.10 to 5.00
50 to 150
0.200 to
2.500
0.2 to 5.0
p.93.
Edit unit
Remarks
1
---
0.1mm
---
0.05mm
---
0.05mm
---
0.05mm
---
1%
---
0.025mm
---
0.1mm
---
Advertisement
Table of Contents
