Table of Contents
Advertisement
(2) Automatic sewing screen
F
H
I
J
K
L
Button and display
A
NUMBER OF BUTTONHOLES
REGISTERED
B
AC PATTERN NAME display
C
KNIFE CANCEL button
D
PRESSRER DOWN button
E
BOBBIN WINDER button
F
AC PATTERN No. display
G
JUMP FEED AMOUNT display
H
SEWING ORDER display
I
MANUAL SEWING
CHANGEOVER button
J
COUNTER display
B
A
G
C
Number of buttonholes registered to AC pattern No. being selected at
present is displayed.
Name registered to AC pattern No. during sewing is displayed.
Every time this button is pressed down, dropping of knife and
non-dropping of knife can be changed over alternately.
Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the presser
down screen.
* When performing threading in this state, turn OFF the power before per-
forming.
Bobbin thread can be wound.
→ Refer to
"II-1-7. Winding bobbin thread"
AC pattern No. during sewing is displayed.
Only when jump feed is set, the amount is displayed.
Sewing order of respective sewing patterns is displayed.
When this button is pressed down, the mode is changed to the manual
sewing mode and the manual sewing screen is displayed.
Note) Be careful since the pre-set is actuated.
Existing counter value is displayed.
→ Refer to
"II-1-8. Using counter"
– 49 –
D
E
O
P
M
N
Description
p.55.
p.56.
Advertisement
Table of Contents
