Table of Contents
Advertisement
■ Removing the CompactFlash (TM)
(2) USB port
■ Inserting a device into the USB port
■ Disconnecting a device from the USB port
Cautions when using the media
• Do not wet or touch it with wet hands. Fire or electric shock will be caused.
• Do not bend, or apply strong force or shock to it.
• Never perform disassembling or remodeling of it.
• Do not put the metal to the contact part of it. Data may be disappeared.
• Avoid storing or using it in the places below.
Place of high temperature or humidity / Place of dew condensation /
Place with much dust / Place where static electricity or electrical noise is likely to occur
1)
❶
2)
❷
Slide the top cover and insert the USB device into
the USB port. Then, copy data to be used from the
USB device onto the main body.
After completion of copying the data, remove the
USB device.
Remove the USB device. Put the cover back in
place.
− 132 −
Hold the panel by hand, open the cover, and
press the media ❷ removing lever ❶ . The me-
dia is eject.
When the lever ❶ is strongly pressed,
the media ❷ may be broken by protrud-
ing and falling.
When the media ❷ is drawn out as it is, remov-
ing is completed.
To protect the USB terminal, do not per-
form sewing by 10 times or more with the
USB thumb drive connected to the sew-
ing machine.
Advertisement
Table of Contents
