Table of Contents
Advertisement
(2) To perform sewing from the start
L
G
H
*
In case of the continuous stitching, (F) moves to the sewing start position of the shape during sewing
and when it is pressed subsequently, it moves to the sewing start position of the previous shape.
*
The existing sewing commands are shown in reverse video in section (G). The kinds of commands are
5 kinds below.
: Sewing command
: Thread trimming command
: Thread trimming command
: Thread tension
: Knife drive
*
The existing number of stitches/number of total stitches are displayed in section (H).
*
Thread tension value is displayed in section (I). When thread tension command is inputted in the nee-
dle entry point by means of the external input device, the button is displayed and thread tension can be
changed.
*
Knife can be can celled with (K).
① Release the error.
Press RESET button
motion screen is displayed.
C
② Return the sewing product to the setting position.
Press INITIAL POSITION TRAVEL button,
presser returns to the sewing product setting position (start posi-
tion).
K
Press CANCEL button
J
presser returns to the sewing product setting position (start posi-
tion).
I
E
F
③ Start the sewing.
D
When you press sewing machine start button
ing machine re-starts sewing.
− 77 −
(C) to release the error, Then the step
(F) and the
(J) to close the pop-up and the
(L), the sew-
Advertisement
Table of Contents
