Table of Contents
Advertisement
⑤ Stop the count.
Display the working measurement screen referring to ① and ②
"II-11-6. Observing the working measurement information"
of
p.166.
STOP button
being performed. When STOP button
measurement is stopped.
After the stop, START button
K
STOP button. To continue measuring, press START button again.
The measured value is not cleared until CLEAR button
pressed.
⑥ Clear the counted value.
When clearing the counted value, set the count to the stop state
and press CLEAR button
( Note : CLEAR button is displayed in case of the stop state only.
)
L
When CLEAR button
tion screen is displayed.
*
When CLEAR button
tion screen, the counted value is cleared.
M
− 168 −
（K） is displayed when the measurement is
is displayed at the position of
（L） .
（L） is pressed, the clear confirma-
（M） is pressed in the clear confirma-
（K） is pressed, the
is
Advertisement
Table of Contents
