JUKI ACF-172-1790 Operation Instruction

TABLE OF BASIC OPERATION FOR ACF-172-1790
1. Performing sewing
Operation Panel display and the description
1. Turn ON the power Data input screen is displayed.
switch.
Confirm No. of ACF PATTERN
2. Confirm the pattern
No. SELECTION button
Press READY key
3. Press READY key.
/Automatic sewing screen
appears.
4. Start sewing. Set the sewing products and
press knee switch or hand
switch.
2. Performing re-sewing from some stop point in sewing
Operation
1. Stop switch is pressed during starting of sewing
machine.
2. Release the error.
3. Return stitching.
4. Re-start sewing.
3. When bobbin thread runs out and count-up screen is displayed
Operation
Press CLEAR button
1. Press CLEAR button.
screen.
(Caution) Turn OFF the power and replace the
2. Replace bobbin with a new
bobbin after confirming that motor has stopped.
one
.
PANEL BASIC OPERATION
<Data input screen>
A
(A).
(B).
B
Sewing machine stops and error is displayed.
Press RESET button (C) to release the error.
button (D) / returns stitch by stitch.
/
button (E ) advances stitch by stitch.
/
button (F ) feeds cloth to the left.
button (G) / feeds cloth to the right.
Set the sewing products and press knee switch or hand switch.
C
Panel display and description
(H) in the count-up
H
(Caution) Be sure to read safety instructions before using.
<Power OFF prohibition screen> <Automatic sewing screen>
Panel display and description
G
F
4. When warning screen of oil replacement is displayed
Operation
1. Warning screen is displayed. The screen is displayed when the designated
oil replacement time is reached.
2. Clear the warning time. Press CLEAR button
3. Lubricate the sewing machine (Caution) Turn OFF the power and lubricate
to fill the need. after confirming that motor has stopped.
No. 00
40016837
E
D
Panel display and description
( I ).
I