Table of Contents
Advertisement
C
(2) Register state at the time of your purchase
The following sewing data have been registered in order from the left hand at the time of your purchase.
Pitch at parallel section
Compensation of bar-tacking width, left
Compensation of bar-tacking width, right
Setting of needle thread tension at the start of sewing
③ Select the sewing data to be registered.
Select the sewing data you desire to register with the sewing
data buttons (C). When the selected button is pressed twice, the
selection is released.
④ Register to the customize button.
When ENTER button
tomize button is finished and the customize button register screen
is displayed. The registered sewing data is displayed on the cus-
D
tomize button.
− 97 −
(D) is pressed, register to the cus-
Advertisement
Table of Contents
