Transaxle Lockout Switches; 3Rd-High Lockout Key Switch - Toro Workman 3000 Series Service Manual

Transaxle Lockout Switches

2–3 Lockout Switch
1
The transaxle 2–3 Lockout switch is closed in 2nd gear
and open in 3rd gear.
Test the switch by disconnecting the wiring connector
and connecting a continuity tester across the two termi-
nals. With the engine off, move transmission shifter to
2nd gear – there should be an indication of continuity.
Move shifter to 3rd gear – there should be no continuity.
High–Low Lockout Switch
2
The transaxle High–Low Lockout switch is closed in Low
range and open in High range.
Figure 8
1. 2–3 lockout switch 2. Hi–Low lockout switch
Test the switch by disconnecting the wiring connector
and connecting a continuity tester across the two termi-
nals. With the engine off, move shifter to Low range –
there should be an indication of continuity. Move shift le-
ver to High range – there should be no continuity.
3rd–High Lockout Key Switch
The 3rd–High Lockout switch is closed in Fast position
and open in Slow position.
Test the switch by disconnecting the wiring and connect-
ing a continuity tester across the two terminals. With the
engine off, move key to Fast position – there should be
an indication of continuity. Move key to Slow position –
there should be no continuity.
Figure 9
Workman 3000/4000 Series Page 8 – 9 Electrical System