Specifications; Specifications - Toro Workman 3000 Series Service Manual

Specifications

Item
Front wheel toe–in
Front tire
Maximum front tire pressure
Rear tire
Maximum rear tire pressure
Wheel nut torque
Brake fluid
Tire Pressure
1. Tire pressure needed is determined by the payload
carried.
2. The lower the air pressure, the less the compaction,
and tire marks are minimized. Lower pressure should
not be used for heavy payloads at high speeds. Tire
damage may result.
3. High pressure should be used for heavier payloads
at higher speeds. Do not exceed maximum tire pres-
sure.
4. See Operator's Manual for additional tire pressure
information.
Chassis Page 7 – 2
Specification
0 to 0.125 in. (0 to 3 mm)
20" x 10" – 10, 4 ply
20 PSI
24" x 12" – 12, 6 ply
18 PSI
45 to 65 ft–lb (61 to 88 N–m)
DOT 3
Workman 3000/4000 Series