While Operating - Toro Workman 3000 Series Service Manual

While Operating

1. Sit on the seat when starting and operating the ve-
hicle.
2. Before starting the engine:
A. Sit on operator's seat and engage the parking
brake.
B. Disengage PTO (if so equipped) and return hand
throttle lever to OFF position (if so equipped).
C. On TC models, make sure that hydraulic lever is
in the neutral position.
D. Move shift lever to NEUTRAL and depress clutch
pedal. Keep foot off accelerator pedal.
E. Turn ignition key to START.
3. Do not run engine in a confined area without ade-
quate ventilation. Exhaust fumes are hazardous and
could possibly be deadly.
Workman 3000/4000 Series
4. Do not touch engine, radiator, muffler or exhaust pipe
while engine is running or soon after it is stopped. These
areas could be hot enough to cause burns.
5. Before getting off the seat:
A. Stop movement of the vehicle.
B. Lower bed.
C. Shut engine off and wait for all movement to stop.
D. Set parking brake and remove key from ignition
switch.
E. Do not park on slopes unless wheels are chocked
or blocked.
Page 1 – 3
Safety