Toro Workman 3000 Series Service Manual page 128

7. Remove PTO input shaft from PTO housing:
A. Shift PTO to "ON" position.
B. Remove 2 retaining rings (Items 1 and 2) from
PTO housing.
C. Slide input shaft assembly (Item 3) toward PTO
shaft side.
D. Remove bearing (Item 4).
E. Slide input shaft toward other side.
F. Remove bearing (Item 5).
G. Remove thrust washer (Item 6) and gear (Item 7),
sliding input shaft toward PTO shaft side.
H. Release shift arm (Item 8) from shifter block (Item
9).
I. Remove input shaft assembly.
8. Disassemble PTO input shaft:
A. Remove shift collar (Item 1).
B. Remove 2 steel balls (Item 2) and spring (Item 3).
Drive Train
1
Page 6 – 56
Figure 120
8
6
3
7
Figure 121
2
3
2
Figure 122
Workman 3000/4000 Series