The Service Group Add/Edit Screen; Figure 457 Object > Service > Service Group > Edit; Table 207 Object > Service > Service Group > Edit - ZyXEL Communications 200 Series User Manual

37.3.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or edit an
existing one. To access this screen, go to the Service Group screen (see
616), and click either the Add icon or an Edit icon.
Figure 457 Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 207 Object > Service > Service Group > Edit
LABEL
Name
Description
Available
Member
OK
Cancel
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
Enter a description of the service group, if any. You can use up to 60 printable
ASCII characters.
This field displays the names of the service and service group objects that can be
added to the service group.
Select service and service group objects that you want to be members of this group
and click the right arrow to add them to the member list.
This field displays the names of the service and service group objects that have
been added to the service group. The order of members is not important. To
remove members, select them and click the left arrow.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 37 Services
Section 37.3 on page
617