Adding A Dns Service Control Rule; Www Overview; Figure 494 System > Dns > Service Control Rule Add; Table 237 System > Dns > Service Control Rule Add - ZyXEL Communications 200 Series User Manual

Unified security gateway

Hide thumbs Also See for 200 Series:

Table of Contents

Chapter 43 System

Table 236 System > DNS > MX Record Add (continued)

43.5.10 Adding a DNS Service Control Rule

Click the Add icon in the Service Control table to add a service control rule.

Figure 494 System > DNS > Service Control Rule Add

The following table describes the labels in this screen.

Table 237 System > DNS > Service Control Rule Add

Address Object

The following figure shows secure and insecure management of the ZyWALL coming in from

the WAN. HTTPS and SSH access are secure. HTTP, Telnet, and dial-in management access

are not secure.

Click OK to save your customized settings and exit this screen.

Click Cancel to exit this screen without saving

Select ALL to allow or deny any computer to send DNS queries to the ZyWALL.

Select a predefined address object to just allow or deny the computer with the IP

address that you specified to send DNS queries to the ZyWALL.

Select ALL to allow or prevent DNS queries through any zones.

Select a predefined zone on which a DNS query to the ZyWALL is allowed or

Select Accept to have the ZyWALL allow the DNS queries from the specified

Select Deny to have the ZyWALL reject the DNS queries from the specified

Click OK to save your customized settings and exit this screen.

Click Cancel to exit this screen without saving

ZyWALL USG 100/200 Series User's Guide

Zywall usg 100 series