The Interface Status Screen - ZyXEL Communications 200 Series User Manual

Chapter 10 Interface
Table 47 Relationships Between Different Types of Interfaces (continued)
INTERFACE
PPPoE/PPTP interface
virtual interface
(virtual Ethernet interface)
(virtual VLAN interface)
(virtual bridge interface)
trunk
* - You cannot set up a PPPoE/PPTP interface, virtual Ethernet interface or virtual VLAN interface if the
underlying interface is a member of a bridge. You also cannot add an Ethernet interface or VLAN
interface to a bridge if the member interface has a virtual interface or PPPoE/PPTP interface on top of it.
Finding Out More
• See Section 5.2 on page 110
and zones in the ZyWALL.
• See Section 5.4.2 on page 114
• See Section 10.16 on page 265
• See Section 6.1 on page 125
roles.
• See Section 6.2 on page 129
• See Section 6.3 on page 131
• See Chapter 11 on page 269

10.2 The Interface Status Screen

This screen lists all of the ZyWALL's interfaces and gives packet statistics for them. Click
Network > Interface to access this screen.
202
REQUIRED PORT / INTERFACE
WAN1, WAN2, OPT*
Ethernet interface*
VLAN interface*
bridge interface
Ethernet interface
Cellular interface
VLAN interface
bridge interface
PPPoE/PPTP interface
auxiliary interface
details on the differences between physical ports, interfaces,
for related information about the Interface screens.
for background information on interfaces.
for an example of configuring Ethernet interfaces and port
for an example of configuring a cellular (3G) interface.
for an example of configuring a WLAN interface.
to configure load balancing using trunks.
ZyWALL USG 100/200 Series User's Guide