How To Configure Load Balancing; Figure 97 Firewall > Lan1 To Dmz > Edit; Figure 98 Firewall > Add; Figure 99 Trunk Example - ZyXEL Communications 200 Series User Manual

Unified security gateway

Hide thumbs Also See for 200 Series:

Table of Contents

Chapter 6 Tutorials

Figure 97 Firewall > LAN1 to DMZ > Edit

3 Click the Add icon at the top of the rule list to create a rule for one of the user groups

that is allowed to access the DMZ.

4 Select one of the user groups that is allowed to access the DMZ, and click OK.

Figure 98 Firewall > Add

5 Repeat this process to set up firewall rules for the other user groups that are allowed to

access the DMZ.

6.6 How to Configure Load Balancing

The following example shows how to set up a trunk for two WAN connections (to the

Internet). The available bandwidth for the connections is 1Mbps (wan1) and 512 Kbps (wan2)

respectively. As these connections have different bandwidth, you have decided to use the

Weighted Round Robin algorithm and to send traffic to wan1 and wan2 in a 2:1 ratio.

wan1: 1 Mbps

wan2: 512 Kbps

ZyWALL USG 100/200 Series User's Guide

Zywall usg 100 series