ZyXEL Communications 200 Series User Manual page 795

Table 295 System Logs (continued)
LOG MESSAGE
Update the profile %s
has failed because WAN
interface was link-
down.
Update the profile %s
has failed because WAN
interface was not
connected.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
The profile %s has
been paused because
the HA interface of
VRRP status was
standby.
Update the profile %s
has failed because HA
interface was link-
down.
Update the profile %s
has failed because the
HA interface was not
connected.
Update the profile %s
has failed because IP
address of HA
interface was empty.
Update the profile %s
has failed because
ping-check of HA
interface has failed.
DDNS has been disabled
by Device-HA.
DDNS has been enabled
by Device-HA.
Disable DDNS has
succeeded.
Enable DDNS has
succeeded.
DDNS profile %s has
been renamed as %s.
DDNS profile %s has
been deleted.
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
DDNS profile cannot be updated for WAN IP because WAN iface is
link-down, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN iface is
PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP of WAN iface is
0.0.0.0, 1st %s is the profile name.
DDNS profile cannot be updated because the ping-check for WAN
iface failed , %s is the profile name.
The profile is paused by Device-HA, because the VRRP status of that
HA iface is standby, %s is the profile name.
DDNS profile cannot be updated for HA IP address because HA iface
is link-down, %s is the profile name.
DDNS profile cannot be updated for HA IP address because HA iface
is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP address of HA iface is
0.0.0.0, %s is the profile name.
DDNS profile cannot be updated because the fail of ping-check for HA
iface, %s is the profile name
DDNS is disabled by Device-HA, because all VRRP groups are
standby.
DDNS is enabled by Device-HA, because one of VRRP groups is
active.
Disable DDNS.
Enable DDNS.
Rename DDNS profile, 1st %s is the original profile name, 2nd %s is
the new profile name.
Delete DDNS profile, %s is the profile name,
Appendix A Log Descriptions
795