Table 281 L2Tp Over Ipsec Logs - ZyXEL Communications 200 Series User Manual

Table 280 SSL VPN Logs (continued)
LOG MESSAGE
Failed login attempt
to SSLVPN from %s
(reach the max. number
of simultaneous logon)
Failed login attempt
to SSLVPN from %s
(incorrect password or
inexistent username)

Table 281 L2TP Over IPSec Logs

LOG MESSAGE
The configuration of
L2TP over IPSec has
been changed.
L2TP over IPSec may not
work since Crypto Map
%s using Manual Key.
L2TP over IPSec may not
work since Crypto Map
%s using Tunnel Mode.
L2TP over IPSec may not
work since Crypto Map
%s is deactivated.
User %s has been denied
from L2TP service.
(Inexistent User)
User %s has been denied
from L2TP service.
(Disallowed User)
User %s has been denied
from L2TP service.
(Incorrect Password)
User %s has been denied
from L2TP
service.(Incorrect
Username or Password)
User has been denied
from L2TP service.
(address pool
exhausted)
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
The listed user (%s) failed to log into SSL VPN because the maximum
number of simultaneous logons was already reached.
The listed user (%s) failed to log into SSL VPN because of entering
an incorrect password or a user name that does not exist.
DESCRIPTION
The L2TP over IPSec configuration has been modified.
L2TP over IPSec does not support manual key management. L2TP
over IPSec may not work because the IPSec VPN connection it uses
(Crypto Map %s) has been set to use manual key management.
L2TP over IPSec does not support tunnel mode encapsulation. L2TP
over IPSec may not work because the IPSec VPN connection it uses
(Crypto Map %s) has been set to use tunnel mode encapsulation.
L2TP over IPSec may not work because the IPSec VPN connection it
uses (Crypto Map %s) has been turned off.
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because the user name does not exist.
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because the user name is not specified in
the L2TP over IPSec configuration.
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because the correct password was not
provided.
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because an incorrect user name or
password was provided.
An attempted login to the L2TP over IPSec service failed because the
L2TP over IPSec IP address pool does not have any more IP
addresses to give out.
Appendix A Log Descriptions
765