Snmp; Figure 522 Snmp Management Model - ZyXEL Communications 200 Series User Manual

Chapter 43 System
Table 242 System > FTP (continued)
LABEL
Add icon
Apply
Reset

43.10 SNMP

Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. Your ZyWALL supports SNMP agent functionality,
which allows a manager station to manage and monitor the ZyWALL through the network.
The ZyWALL supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next
figure illustrates an SNMP management operation.

Figure 522 SNMP Management Model

An SNMP managed network consists of two main types of component: agents and a manager.
696
DESCRIPTION
Click the Add icon in the heading row to open a screen where you can add a new
rule. Refer to Table 239 on page 682
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking you to
confirm that you want to delete the rule. Note that subsequent rules move up by one
when you take this action.
Click the Move to N icon to display a field to type a number for where you want to
put that rule and press [ENTER] to move the rule to the number that you typed.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
for information on the fields.
ZyWALL USG 100/200 Series User's Guide