The My Certificates Edit Screen - ZyXEL Communications 200 Series User Manual

Unified security gateway

Hide thumbs Also See for 200 Series:

Table of Contents

Chapter 41 Certificates

Table 220 Object > Certificate > My Certificates > Add (continued)

Authentication

If you configured the My Certificate Create screen to have the ZyWALL enroll a certificate

and the certificate enrollment is not successful, you see a screen with a Return button that

takes you back to the My Certificate Create screen. Click Return and check your

information in the My Certificate Create screen. Make sure that the certification authority

information is correct and that your Internet connection is working properly if you want the

ZyWALL to enroll a certificate online.

41.2.2 The My Certificates Edit Screen

Click Object > Certificate > My Certificates and then the Edit icon to open the My

Certificate Edit screen. You can use this screen to view in-depth certificate information and

change the certificate's name.

When you select Create a certification request and enroll for a certificate

immediately online, the certification authority may want you to include a

reference number and key to identify you when you send a certification

Fill in both the Reference Number and the Key fields if your certification

authority uses CMP enrollment protocol. Just the Key field displays if your

certification authority uses the SCEP enrollment protocol.

For the reference number, use 0 to 99999999.

For the key, use up to 31 of the following characters. a-zA-Z0-

9;|`~!@#$%^&*()_+\{}':,./<>=-

Click OK to begin certificate or certification request generation.

Click Cancel to quit and return to the My Certificates screen.

ZyWALL USG 100/200 Series User's Guide

Zywall usg 100 series