Table 297 Device Ha Logs - ZyXEL Communications 200 Series User Manual

Table 296 Connectivity Check Logs (continued)
LOG MESSAGE
Can't get BROADCAST
address of %s
interface
Can't use MULTICAST IP
for destination
The destination is
invalid, because
destination IP is
broadcast IP
Can't get MAC address
of %s interface!
To send ARP REQUEST
error!
The %s routing status
seted to DEAD by
connectivity-check
The %s routing status
seted ACTIVATE by
connectivity-check

Table 297 Device HA Logs

LOG MESSAGE
Device HA VRRP Group
%s has been added.
Device HA VRRP group
%s has been modified.
Device HA VRRP group
%s has been deleted.
Device HA VRRP
interface %s for VRRP
Group %s has changed.
Device HA syncing from
%s starts.
%s has no file to
sync, Skip syncing it
for %s.
Master configuration
is the same with
Backup. Skip updating
it.
%s file not existed,
Skip syncing it for %s
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
The connectivity check process can't get broadcast address of
interface
%s: interface name
The connectivity check process can't use multicast address to check
link-status.
The connectivity check process can't use broadcast address to check
link-status.
The connectivity check process can't get MAC address of interface.
%s: interface name
The connectivity check process can't send ARP request packet.
The interface routing can't forward packet.
%s: interface name
The interface routing can forward packet.
%s: interface name
DESCRIPTION
An VRRP group has been created, %s: the name of VRRP group.
An VRRP group has been modified, %s: the name of VRRP group.
An VRRP group has been deleted, %s: the name of VRRP group.
Configuration of an interface that belonged to a VRRP group has been
changed, 1st %s: VRRP interface name, 2ed %s: %s: the name of
VRRP group.
Device HA Syncing from Master starts when user click "Sync Now"
using Auto Sync, %s: The IP of FQDN of Master.
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact, there
should be something in the Master for the device to synchronize with,
1st %s: The syncing object, 2ed %s: The feature name for the syncing
object.
The System Startup configuration file synchronized from the Master is
the same with the one in the Backup, so the configuration does not
have to be updated.
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact, there
should be something in the Master for the device to synchronize with,
1st %s: The syncing object, 2ed %s: The feature name for the syncing
object.
Appendix A Log Descriptions
797