Figure 414 Valid Commands; Table 215 Valid Commands; Command Syntax; Command Usage - ZyXEL Communications ZyWALL 2 Plus User Manual

Chapter 42 System Maintenance Menus 8 to 10

42.1.1 Command Syntax

The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.

42.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.

Figure 414 Valid Commands

Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
poe
radius
bridge
radius
ras>
The following table describes some commands in this screen.

Table 215 Valid Commands

COMMAND
sys
exit
device
ether
aux
ip
ipsec
bridge
bm
certificates
588
exit
pptp
ip
bm
DESCRIPTION
The system commands display device information and configure device settings.
This command returns you to the SMT main menu.
The device commands deal with the dial backup connection.
These commands display Ethernet information and configure Ethernet settings.
These commands display dial backup information and control dial backup connections.
These commands display IP information and configure IP settings.
These commands display IPSec information and configure IPSec settings.
These commands display bridge information.
These commands configure bandwidth management settings and display bandwidth
management information.
These commands display certificate information and configure certificate settings.
device ether
aux config
ipsec ppp
certificates cnm
ZyWALL 2 Plus User's Guide