Figure 27 Vpn Wizard: Network Setting; Table 16 Vpn Wizard: Network Setting - ZyXEL Communications ZyWALL 2 Plus User Manual

Interned security appliance
Hide thumbs Also See for ZyWALL 2 Plus:
Table of Contents

Advertisement

Two active SAs cannot have the local and remote IP address(es) both the same. Two active
SAs can have the same local or remote IP address, but not both. You can configure multiple
SAs between the same local and remote IP addresses, as long as only one is active at any time.

Figure 27 VPN Wizard: Network Setting

The following table describes the labels in this screen.

Table 16 VPN Wizard: Network Setting

LABEL
Network Policy
Property
Active
Name
Network Policy
Setting
Local Network
Starting IP
Address
Ending IP
Address/
Subnet Mask
ZyWALL 2 Plus User's Guide
DESCRIPTION
If the Active check box is selected, packets for the tunnel trigger the ZyWALL to build
the tunnel.
Clear the Active check box to turn the network policy off. The ZyWALL does not
apply the policy. Packets for the tunnel do not trigger the tunnel.
Type up to 32 characters to identify this VPN network policy. You may use any
character, including spaces, but the ZyWALL drops trailing spaces.
Local IP addresses must be static and correspond to the remote IPSec router's
configured remote IP addresses.
Select Single for a single IP address. Select Range IP for a specific range of IP
addresses. Select Subnet to specify IP addresses on a network by their subnet
mask.
When the Local Network field is configured to Single, enter a (static) IP address on
the LAN behind your ZyWALL. When the Local Network field is configured to Range
IP, enter the beginning (static) IP address, in a range of computers on the LAN behind
your ZyWALL. When the Local Network field is configured to Subnet, this is a
(static) IP address on the LAN behind your ZyWALL.
When the Local Network field is configured to Single, this field is N/A. When the
Local Network field is configured to Range IP, enter the end (static) IP address, in a
range of computers on the LAN behind your ZyWALL. When the Local Network field
is configured to Subnet, this is a subnet mask on the LAN behind your ZyWALL.
Chapter 3 Wizard Setup
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 2wg

Table of Contents