Figure 325 Menu 5: Dmz Setup; Figure 326 Menu 5.2: Tcp/Ip And Dhcp Ethernet Setup; Ip Address - ZyXEL Communications ZyWALL 2 Plus User Manual

Chapter 32 DMZ Setup
32.3 TCP/IP Setup
For more detailed information about RIP setup, IP multicast and IP alias, please refer to
Chapter 6 on page

32.3.1 IP Address

From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).

Figure 325 Menu 5: DMZ Setup

From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays Menu 5.2 -

Figure 326 Menu 5.2: TCP/IP and DHCP Ethernet Setup

DHCP= None
Client IP Pool:
Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
IP Address= N/A
Secondary DNS Server= N/A
IP Address= N/A
Third DNS Server= N/A
IP Address= N/A
DHCP Server Address= N/A
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
30.4 on page 492
502
133.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
TCP/IP and DHCP Ethernet Setup,
Menu 5.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
for information on how to configure these fields.
TCP/IP Setup:
IP Address= 10.2.3.4
IP Subnet Mask= 255.0.0.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
ZyWALL 2 Plus User's Guide
as shown next.
Section