Figure 376 Example Filter: Menu 21.1.3.1; Figure 377 Example Filter Rules Summary: Menu 21.1.3 - ZyXEL Communications ZyWALL 2 Plus User Manual

Figure 376 Example Filter: Menu 21.1.3.1

The port number for the Telnet service (TCP protocol) is 23. See RFC 1060 for port numbers
of well-known services.
When you press [ENTER] to confirm, you will see the following screen. Note that there is
only one filter rule in this set.

Figure 377 Example Filter Rules Summary: Menu 21.1.3

# A Type
- - ---- ----------------------------------------------- - - -
1 Y IP
2 N
3 N
4 N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure: 1
This shows you that you have configured and activated (A = Y) a TCP/IP filter rule (Type =
IP, Pr = 6) for destination Telnet ports (DP = 23).
M = N means an action can be taken immediately. The action is to drop the packet (m = D) if
the action is matched and to forward the packet immediately (n = F) if the action is not
matched no matter whether there are more rules to be checked (there aren't in this example).
ZyWALL 2 Plus User's Guide
Menu 21.1.3.1 - TCP/IP Filter Rule
Filter #: 3,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6 IP Source Route= No
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 23
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
TCP Estab= No
More= No
Action Matched= Drop
Action Not Matched= Forward
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 21.1.3 - Filter Rules Summary
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23
Chapter 38 Filter Configuration
Log= None
Filter Rules M m n
N D F
551