Figure 248 Example: Lock Denoting A Secure Connection; Login Screen - ZyXEL Communications ZyWALL 2 Plus User Manual

• Click CERTIFICATES. Find the certificate and check its Subject column. CN
Use this procedure to have the ZyWALL use a certificate with a common name that matches
the ZyWALL's actual IP address. You cannot use this procedure if you need to access the
WAN port and it uses a dynamically assigned IP address.
• Create a new certificate for the ZyWALL that uses the IP address (of the
• Go to the remote management WWW screen and select the newly created

21.4.4 Login Screen

After you accept the certificate, the ZyWALL login screen appears. The lock displayed in the
bottom right of the browser status bar denotes a secure connection.

Figure 248 Example: Lock Denoting a Secure Connection

Click Login and you then see the next screen.
The factory default certificate is a common default certificate for all ZyWALL models.
ZyWALL 2 Plus User's Guide
stands for certificate's common name (see
example).
ZyWALL's port that you are trying to access) as the certificate's common name.
For example, to use HTTPS to access a LAN port with IP address 192.168.1.1,
create a certificate that uses 192.168.1.1 as the common name.
certificate in the Server Certificate field. Click Apply.
Chapter 21 Remote Management
Figure 250 on page 384 for an
383