Figure 280 Maintenance > Password; Table 161 Maintenance > Password; Time And Date - ZyXEL Communications ZyWALL 2 Plus User Manual

Figure 280 MAINTENANCE > Password
The following table describes the labels in this screen.
Table 161 MAINTENANCE > Password
LABEL
Old Password
New Password
Retype to Confirm
Apply
Reset

26.4 Time and Date

The ZyWALL's Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyWALL.
To change your ZyWALL's time and date, click MAINTENANCE > Time and Date. The
screen appears as shown. Use this screen to configure the ZyWALL's time based on your local
time zone.
ZyWALL 2 Plus User's Guide
DESCRIPTION
Type the default password or the existing password you use to access the system
in this field. If you forget the password, you may have to use the hardware RESET
button. This restores the default password of 1234.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type.
Type the new password again for confirmation.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 26 Maintenance
449