Figure 441 Macintosh Os X: Network - ZyXEL Communications ZyWALL 2 Plus User Manual

Interned security appliance

Hide thumbs Also See for ZyWALL 2 Plus:

Table of Contents

Appendix A Setting up Your Computer's IP Address

Figure 441 Macintosh OS X: Network

4 For statically assigned settings, do the following:

• From the Configure box, select Manually.

• Type your IP address in the IP Address box.

• Type your subnet mask in the Subnet mask box.

• Type the IP address of your ZyWALL in the Router address box.

5 Click Apply Now and close the window.

6 Turn on your ZyWALL and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux

9.0. Procedure, screens and file location may vary depending on your Linux distribution and

release version.

ZyWALL 2 Plus User's Guide

Table of Contents