Figure 399 Successful Backup Confirmation Screen; Restore Configuration; Restore Using Ftp - ZyXEL Communications ZyWALL 2 Plus User Manual

Interned security appliance

Hide thumbs Also See for ZyWALL 2 Plus:

Table of Contents

4 After a successful backup you will see the following screen. Press any key to return to

the SMT menu.

Figure 399 Successful Backup Confirmation Screen

This section shows you how to restore a previously saved configuration. Note that this

function erases the current configuration before restoring a previous back up configuration;

please do not attempt to restore unless you have a backup configuration file stored on disk.

FTP is the preferred method for restoring your current computer configuration to your

ZyWALL since FTP is faster. Please note that you must wait for the system to automatically

restart after the file transfer is complete.

Do not interrupt the file transfer process as this may PERMANENTLY

DAMAGE YOUR ZyWALL. When the Restore Configuration process is

complete, the ZyWALL will automatically restart.

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file

upload in this chapter.

ZyWALL 2 Plus User's Guide

Chapter 41 Firmware and Configuration File Maintenance

** Backup Configuration completed. OK.

### Hit any key to continue.###

Table of Contents